Cyanide Process Extraction Of Gold Through Cyanidation The ore is grounded and crushed. If the ore containing the gold has other forms of metals or any kind of sulphide... Now the gold is soluble. This method of making soluble gold is known as leaching. In the process of leaching, a dilute... The ...
John Stewart MacArthur developed the cyanide process for gold extraction in 1887. The solubility of gold in a water and cyanide solution was discovered in 1783 by Carl Wilhelm Scheele, but it was not until the late 19th century, that an industrial process was developed.
Heap leaching: In the open, cyanide solution is sprayed over huge heaps of crushed ore spread atop giant collection pads. The cyanide dissolves the gold from the ore into the solution as it trickles through the heap. The pad collects the now metal impregnated solution which is stripped of gold and resprayed on the heap until the ore is depleted.
Extraction of gold using cyanide Gold is found in very low concentrations in the ore from which it is mined. To collect the gold from the ore it needs to be separated from the other minerals in the ore. To do this the gold needs to be made into a soluble form so that it can be separated from the other minerals as gold is insoluble. To make gold soluble sodium cyanide is
Gold cyanidation is a hydrometallurgical technique for extracting gold from low grade ore by converting the gold to a water soluble coordination complex. It is the most commonly used leaching process for gold extraction.
The gold cyanidation process is the most important method ever developed for extracting gold from its ores. The reasons the widespread acceptance of cyanidation are economic as well as metallurgical. It usually obtains a higher recovery of gold than plate amalgamation and is easier to operate than the chlorine or bromine process.
Here I present an Process EXAMPLE of Gold Extraction Cyanide in which the cyanidation feed consists of a pyrite concentrate floated after the selective flotation of a copper gold concentrate. The pyrite concentrate is reground to 90% minus 325 mesh and aerated in a high lime solution prior to cyanidation. It contains 99% sulphides of which 10 to 20 percent is pyrrhotite and 0.3 to 0.7% chalcopyrite, the remainder being mostly pyrite.
June 10, 2020
Copyright © 2020.Company name All rights reserved.