However, in cases where solids concentration in high solids slurries is too high , it is better to handle these slurries using vacuum filtration, such as a continuous Indexing Vacuum Belt Filter, since high concentration of solids in slurries will increase pressure and if pressure is too high, the equipment might be damaged and/or less efficient operation.
Belt Filter Press DESCRIPTION Belt filter presses are used to remove water from liquid wastewater residuals and produce a non liquid material referred to as cake. Dewatered residuals, or cake, vary in consistency from that of custard to moist soil. Dewatering serves the following purposes: C Reducing the volume, thus reducing storage
Typically, a belt filter press receives a slurry ranging from 1 4% feed solids and produces a final product of 12 35% cake solids. Performance depends on the nature of the solids being processed.
The belt filter press often has problems mainly in the filter belt, mixed cylinder bearing, correction, etc. Therefore, the operation and management personnel are required to use the belt filter press in accordance with the operating procedures. Regular inspections of the relevant parts of the belt press and recent The operating status and management data are from easy to difficult to investigate the cause of the fault to prevent the impact of the fault from expanding.
Product Range and Application. Komline Sandersons Kompress® Series III Belt Filter Press is available in a three belt , a two belt and an extended gravity two belt design. The three belt G GRSL press has an independent gravity zone with a more open belt for more rapid drainage of the volume of water.
Belt filter press is a widely used product for the efficient dewatering of sludge in urban, industrial, mining and aggregate wastewater treatment. It is especially suitable for the dewatering of tailings such as iron ore, copper ore, lead zinc ore, fluorite ore, bauxite or rare earth ore; dewatering operations such as beneficiation wastewater, sand washing sludge and washing sludge.
June 10, 2020
Copyright © 2020.Company name All rights reserved.